This is a very distinctive solid link (PU) bracelet featuring a three fold adjustable stainless steel deployment clasp. Each link is secured by a stainless removable pin with an oversize endcap.
This bracelet works well with a wide variety of sports and divers style watches and a very stylish upgrade over OE replacement straps or bracelets.
Matt finish links with brushed stainless steel clasp,
Extremely light in weight yet very substantial in appearance.
Supplied in a 20mm fitting as standard - however the design of this bracelet allows for very easy 'DIY' modification allowing it to be fitted to 19mm or 18mm lug width watches. This is done by simply carefully trimming the small tab on each side of the spring bar housing with a sharp blade.
While this bracelet is not technically speaking a practical Divers bracelet / watchstrap it looks great on the Divers style watches we've fitted it to so ideal for 'desk divers' such as myself (KD).
Overall length (as supplied ) - 187mm
Link thickness - 5mm constant
Available in Black - 20mm fitting as standard (see above details for compatibility with smaller case sizes )
*Please note. Should bracelet links need to be removed (very likey), TSS strongly advises that link removal should be undertaken by a qualified watch repairer or service centre as special tools are required to safely remove and replace the link pins and securing end caps. It should also be noted that some high street retailers may not accept this work and should this be the case TSS recommends that you locate a watch repair centre through your local Yellow pages under 'Clock and Watch Repairers'.
**DIY link removal is not recommended as the security of the mechanical linkages could be compromised if the appropriate tools are not used.